In Stock Now!
1. Main Unibody: Clear Nylon 3D Printed
2. 3D Printed Nylon Canopy
3. Black M2 x 4mm Screws
Overall frame weight: 20g
Props: 55mm Blade Propeller
Motors : 8.5mm Diameter
FC : Brushless Furious FPV Nuke
LiPo : LiPo 480mah/40C 1S (3.7V)
FPV Camera: FX806T NanoCam
Hard to STOP!!! MicroTad-EX! Micro Quad Addiction!!
Inspired by so many awesome Micro Frames out there and, the urge for a new indoor micro fpv rig, drove us to the MicroTad-EX 100!
I've been searching for a simple yet hardcore looking micro frame for a while now... since I already had the whole set up from an old failed micro build and, the search of a new rig to put the components on, drove me to where we are at now... The MicroTad-EX! :)
I notice most of the micro frames (if not all) are either X or H shape, so there was a gap on the current micro market and, this was a Stretched X Micro Frame... so we decided to fill that emptiness and, following our tradition, went with the 3D Printed Nylon Mono Plate and a Canopy, blending with the same Stretched X Pattern as the LittleTad-EX and, this is where we ended up.
The canopy was designed again to reach extreme FPV Camera angle, up to 75-80 degrees (with the proper Brushless FC like the Nuke) for those Hard Core speed freaks!
Guerrilla Drone MicroTad-EX
- Brand: Guerrilla Drone
- Product Code: microtadex
- Availability: In Stock
- Ex Tax: £16.67