In Stock Now!


Specs:


1. Main Unibody: Clear Nylon 3D Printed

2. 3D Printed Nylon Canopy

3. Black M2 x 4mm Screws

Overall frame weight: 20g

Suggested Components


Props: 55mm Blade Propeller

Motors : 8.5mm Diameter

FC : Brushless Furious FPV Nuke

LiPo : LiPo 480mah/40C 1S (3.7V)

FPV Camera: FX806T NanoCam


Hard to STOP!!! MicroTad-EX! Micro Quad Addiction!!


Inspired by so many awesome Micro Frames out there and, the urge for a new indoor micro fpv rig, drove us to the MicroTad-EX 100!


I've been searching for a simple yet hardcore looking micro frame for a while now... since I already had the whole set up from an old failed micro build and, the search of a new rig to put the components on, drove me to where we are at now... The MicroTad-EX! :)


I notice most of the micro frames (if not all) are either X or H shape, so there was a gap on the current micro market and, this was a Stretched X Micro Frame... so we decided to fill that emptiness and, following our tradition, went with the 3D Printed Nylon Mono Plate and a Canopy, blending with the same Stretched X Pattern as the LittleTad-EX and, this is where we ended up.


The canopy was designed again to reach extreme FPV Camera angle, up to 75-80 degrees (with the proper Brushless FC like the Nuke) for those Hard Core speed freaks!

Write a review

Note: HTML is not translated!
    Bad           Good

Guerrilla Drone MicroTad-EX

  • £20.00

  • Ex Tax: £16.67

Related Products

ImmersionRC - Tramp HV – 5.8GHz Video Transmitter

ImmersionRC - Tramp HV – 5.8GHz Video Transmitter

This is the smallest, lightest, high-power, high-voltage A/V Transmitter in the business, 31 x 20mm,..

£44.99 Ex Tax: £37.49

4x 220mah 50c 1s 3.7v Lipo Tiny Whoop battery

4x 220mah 50c 1s 3.7v Lipo Tiny Whoop battery

4pcs 220mAh 50C 1S Blade Inductrix Lipo Battery 3.7VFeatures:Capacity: 220mAh, Voltage: 3.7V 1S220 m..

£14.99 Ex Tax: £12.49

Lipo Battery 1S Balance ChargingBoard Ultra Micro JST-PH Parallel Connect Plate

Lipo Battery 1S Balance ChargingBoard Ultra Micro JST-PH Parallel Connect Plate

1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX&nb..

£4.99 Ex Tax: £4.16

Tiny Whoop Travel Case

Tiny Whoop Travel Case

Suitable: Blade inductrix, Tiny Whoop etc.Compact black hard case for the protection of your new dro..

£8.99 Ex Tax: £7.49

Guerrilla Drone LittleTad-EX

Guerrilla Drone LittleTad-EX

In Stock Now!Specs:1. Main Unibody: Matt 3K, 3mm Carbon Fiber2. 3D Printed Nylon Canopy3. Black Alum..

£45.00 Ex Tax: £37.50

Guerrilla Drone AFRO BF-EX

Guerrilla Drone AFRO BF-EX

In Stock Now!Specs:1. Main Unibody: Matt 3K, 4mm Carbon Fiber2. 3D Printed Nylon Canopy3. Black Alum..

£70.00 Ex Tax: £58.33

Tags: Frames, Guerrilla, Drone, MicroTad-EX, Guerrilla Drone MicroTad-EX,