SP RACING F3 EVO Brush Flight Controller for indoor Tiny FPV Quadcopter

SP RACING F3 EVO Brush Flight Controller for indoor Tiny FPV Quadcopter Micro Quad

SP RACING F3 EVO Brush Flight Controller for indoor Tiny FPV Quadcopter

 

The flight controller fit for quadrocopter,working current for each axis can be up to 10A

Improved boost buck module, through the UART1 or UART2 output 5V can reach 500mah stable current output,fit for 25mw transmitter with camera

Support LED_STRIP function.

 

Pls do release the propellers when debugging or brushing program.

Brushed F3 EVO 1.13.0 program as default

 

Features:

 

1, F3_EVO_Brush revision is out of the F3 EVO SP RACING based on is based on a SP RACING F3 EVO firmware 32 brush flight control.

2, the flight control support 1S (4.2V) and 2S (8.4V) power supply, 2S power can bring flying experience more violence

3, using STM32F303CCT6 + MPU6500, advanced hardware platform F3 guarantee more stable flight

4, with a large current NMOS transistors, operating current of up to 10A or more. Each machine is equipped with freewheeling diodes.

5, support for PPM, SBUS, DSM receiver input signal.

6, with battery voltage detection and buzzer interface.

7, PCBA dimensions are: 22MM * 32.5MM, PCB thickness: 1.2MM.

Considerations before applying power: battery voltage selection, the default shipping is 1S (4.2V); 2S first need to disconnect the short contacts 1S, 2S and then connect two pads short. Prohibit the same three pads shorted together.

34341-3-1

Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 1210
  • Product Code: evobrush
  • Availability: In Stock
  • £13.99
  • Ex Tax: £11.66

Tags: RACING, EVO, Brush, Flight, Controller, for, indoor, Tiny, FPV, Quadcopter, Micro, Quad